These "peel and stick" Tiger Oak veneers are almost foolproof!  Just peel off the release paper and stick this veneer down to any clean, dust free surface.  Note:  Bare wood surfaces should be finished with 2 or 3 coats of paint or varnish before applying these pressure sensitive veneers.

The veneers are pre sanded at the factory and require no further sanding.  They can be finished the same as any wood surface.

Note: Due to circumstances beyond our control the Q/C (quarter cut) Tiger Oak veneer may or may not have "flake" or tiger stripe grain.  We cannot guarantee the absence or presence of this characteristic.  If you have a particular need, I can usually hunt through my stock to satisfy your requrirment.  There is a $30 pick charge for this service.  Phone: 502 265 0954    Ask for me.  Bob Morgan

Thicknesses: 1/64" veneer thickness + a 10 mil paper backer.

Exception: The 2 Ply Peel And Stick Tiger oak is a sturdier, thicker veneer. The extra thickness helps to eliminate any "telegraphing" of defects that may be present in the surface that you apply the veneer to. The overall thickness of the 2 ply wood backed veneers is .040 - Or about 2/3 of a sixteenth of an inch.