These "peel and stick" pressure sensitive veneers are almost foolproof!  Just peel off the release paper and stick this veneer down to any clean, dust free surface.  Note: Bare wood surfaces should be finished with 2 or 3 coats of paint or varnish before applying these pressure sensitive veneers.

Thickness: The 4 sizes shown here have a 1/64" thick veneer with a 10 mil paper back that is permanently bonded to the back of the veneer for strength. The veneer is pre sanded at the factory and needs no sanding.

Note: When ordering the Q/C Tiger Oak veneers please keep in mind that we do not guarantee the presence or absence of the "flake" or "Tiger" grain. If you require a flake Tiger grain we can usually supply this. There is a $30 pick charge for this service.

Need a HEAVIER DUTY Peel and Stick Veneer? Click on the "Pressure Sensitive 2 Ply Wood Backed Veneers" shown below.